Category

Playlist oficial

This document explains how to embed a YouTube player in your application and also defines the parameters that are available in the YouTube embedded player. By appending parameters to the IFrame URL, you can customize the playback experience in your application. For example, you can automatically play videos using the autoplay parameter or cause a video to play repeatedly using the loop parameter. This page currently defines all parameters supported in any YouTube embedded player. Each parameter definition identifies the players that support the corresponding parameter. Note: Embedded players must have a viewport that is at least px by px. If the player displays controls, it must be large enough to fully display the controls without shrinking the viewport below the minimum size. We recommend players be at least pixels wide and pixels tall. You can use any of the following methods to embed a YouTube player in your application and specify player parameters. Note that the instructions below demonstrate how to embed a player that loads a single video.
xxx college image
tyler torro jay cloud

If there's a song in your heart, it will get in her head. Jane Levy stars in this high-concept drama as Zoey Clarke, a whip-smart computer coder forging her way in San Francisco.
pictures of sluty teen girls
huge breast hardcore porn
sexy girl fucked in pantyhose
sex with blind girlnude college foot ball playeranimated white ass fucklovely small girl sex pic

Start your free trial.

Mormons have a well-known code of health, called the Word of Wisdom. Already answered Not a question Bad question Other. We have been married for a little over 3 years. I grew up in a very strict Mormon home and dated only Mormon men until I met my now husband. But you will benefit if you can help him maintain his strength. The Book of Abraham one admits it's not a translation. I don't think we are going to end up being friends but I'll get over that. Maybe we'll break up in a month. Life After Mormonism Chat. It is hard for the others to understand my situation, people must just think that you don't need to worry about anything, but this is not the case.

Embed a YouTube player

Life is a journey and going through it with a true partner, and a mutual respect for curiosity, is so far greatly rewarding. Did U have sex with her yet. Is there hope for us. Notify me of new posts via email. We'll see how long till last I have my business degree and work in a male Dominated environment so I have choices. Then an explanation of the nature of your soul and where it came from and where it's going. All I can do is Trust in God. Tell her that you want your relationship with her, and her relationship with your children together to be separate from her religion with her god. I'm not afraid of long distance, nor am I afraid of moving to follow him for med school, residency, fellowship etc. Sunday is considered sacred by Mormons, and they do not undertake any entertaining or outdoor activities that result in spending, on that day.

This document explains how to embed a YouTube player in your application and also defines the parameters that are available in the YouTube embedded player. By appending parameters to the IFrame URL, you can customize the playback experience in your application. For example, you can automatically play videos using the autoplay parameter or cause a video to play repeatedly using the loop parameter.

This page currently defines all parameters supported in any YouTube embedded player. Each parameter definition identifies the players that support the corresponding parameter. Note: Embedded players must have a viewport that is at least px by px. If the player displays controls, it must be large enough to fully display the controls without shrinking the viewport below the minimum size.

We recommend players be at least pixels wide and pixels tall. You can use any of the following methods to embed a YouTube player in your application and specify player parameters. Note that the instructions below demonstrate how to embed a player that loads a single video. The following section explains how to configure your player to load other types of content, such as playlists and search results.

The URL has the following format:. Since the URL sets the autoplay parameter to 1 , the video would play automatically once the player has loaded. The second parameter in the constructor for the video player is an object that specifies player options. Within that object, the playerVars property identifies player parameters.

This code does not define any player parameters and also does not define other event handlers. You can configure your embedded player to load a video, a playlist, a user's uploaded videos, or search results for a particular query. Set the listType player parameter to playlist. In addition, set the list player parameter to the YouTube playlist ID that you want to load.

Note that you need to prepend the playlist ID with the letters PL as shown in the following example:. In addition, set the list player parameter to the YouTube username whose uploaded videos you want to load. Set the listType player parameter to search. In addition, set the list player parameter to the query term for which you want the player to load search results. If the listType parameter value is search , then the list parameter value specifies the search query.

If the listType parameter value is playlist , then the list parameter value specifies a YouTube playlist ID. In the parameter value, you need to prepend the playlist ID with the letters PL as shown in the example below. In the case of a playlist player or custom player , the player plays the entire playlist and then starts again at the first video.

Supported values are 0 and 1 , and the default value is 0. Currently, the loop parameter only works in the AS3 player when used in conjunction with the playlist parameter. Set the parameter value to 1 to prevent the YouTube logo from displaying in the control bar.

Note that a small YouTube text label will still display in the upper-right corner of a paused video when the user's mouse pointer hovers over the player. If you are using the IFrame API, which means you are setting the enablejsapi parameter value to 1 , you should always specify your domain as the origin parameter value. Valid values are: 0 : This value causes fullscreen playback. This is currently the default value, though the default is subject to change.

Prior to the change, this parameter indicates whether the player should show related videos when playback of the initial video ends. If the parameter's value is set to 1 , which is the default value, then the player does show related videos. If the parameter's value is set to 0 , then the player does not show related videos. After the change, you will not be able to disable related videos. Instead, if the rel parameter is set to 0 , related videos will come from the same channel as the video that was just played.

Supported values are 0 and 1. Setting the parameter's value to 0 causes the player to not display information like the video title and uploader before the video starts playing. If the player is loading a playlist, and you explicitly set the parameter value to 1 , then, upon loading, the player will also display thumbnail images for the videos in the playlist. The parameter value is a positive integer. Note that similar to the seekTo function, the player will look for the closest keyframe to the time you specify.

This means that sometimes the play head may seek to just before the requested time, usually no more than around two seconds. This value is used in YouTube Analytics reporting when the YouTube player is embedded in a widget, and that widget is then embedded in a web page or application.

In that scenario, the origin parameter identifies the widget provider's domain, but YouTube Analytics should not identify the widget provider as the actual traffic source. Revision history August 23, Note: This is a deprecation announcement for the showinfo parameter. In addition, the behavior for the rel parameter is changing. These changes will become effective on or after September 25, After that time, the showinfo parameter will be ignored. The behavior following the changes is consistent with the current default behavior for embedded players with the exception of the channel avatar changes mentioned above.

The controls parameter's definition has been updated to remove references to the deprecated Flash AS3 player. The value 2 has been deprecated as it was originally designed to provide a performance improvement for embeds that loaded a Flash player. This document has been updated to remove references to the deprecated Flash AS3 player as well as to parameters only supported by that player. The YouTube Flash player was deprecated in January The disablekb parameter definition has been corrected to note that the default value is 0 , which means that keyboard controls are enabled.

A value of 1 indicates that keyboard controls should be disabled. The list of keyboard controls that the player supports has also been updated to include the following:. In addition, the effect of pressing the [arrow left] or [arrow right] keys has changed. These keys now jump 5 seconds back arrow left or ahead arrow right in the current video. In addition to the Updated Terms , which will go into effect as of February 10, , this update includes several supporting documents to help explain the policies that developers must follow.

The full set of new documents is described in the revision history for the Updated Terms. In addition, future changes to the Updated Terms or to those supporting documents will also be explained in that revision history. You can subscribe to an RSS feed listing changes in that revision history from a link in that document. European Union EU laws require that certain disclosures must be given to and consents obtained from end users in the EU. The autohide parameter has been deprecated for the HTML5 player. In HTML5 players, the video progress bar and player controls display or hide automatically.

That behavior corresponds to an autohide setting of 1. The theme parameter has been deprecated for the HTML5 player. HTML5 players now always use the dark theme.

A deprecation warning appears in several sections of this document to help point readers to the IFrame Player API as an alternative. The definition of the autohide parameter has been updated to clarify the meaning of the parameter's values. Otherwise, those controls are visible throughout the video. The definition of the hl parameter has been updated to note that the parameter value could be an ISO two-letter language code or a fully specified locale. For example, fr and fr-ca are both valid parameter values.

The definition of the enablejsapi parameter has been reworded to clarify that the parameter enables a player to be controlled via API calls. The parameter descriptions have been updated accordingly. The new hl parameter can be used to set the player's interface language. The interface language is used for tooltips in the player and also affects the default caption track.

The selected caption track may also depend on the availability of caption tracks and user's individual language preferences. Setting the value to 1 causes inline playback. The controls parameter's definition has been updated to reflect the fact that the parameter value only affects the time that the Flash player actually loads in IFrame embeds.

In addition, for IFrame embeds, the parameter value also determines when the controls display in the player. If you set the parameter's value to 2 , then the controls display and the Flash player loads after the user initiates the video playback. YouTube no longer identifies experimental API features and services. The definition of the controls parameter has been updated to reflect support for a parameter value of 2 and to explain that, for AS3 players, the parameter value determines the time when the Flash player actually loads.

If the controls parameter is set to 0 or 1 , the Flash player loads immediately. If the parameter value is 2 , the Flash player does not load until the video playback is initiated. The HTML5 player now supports the color , modestbranding , and rel parameters, and the definitions for these parameters have been updated accordingly. The definition of the showinfo parameter has been updated to explain how that if the player is loading a playlist, and you explicitly set the parameter value to 1 , then, upon loading, the player will also display thumbnail images for the videos in the playlist.

Note that this functionality is only supported for the AS3 player since that is the only player that can load a playlist. The showinfo parameter's definition has been updated to reflect the fact that the HTML5 player supports this parameter.

The new end parameter specifies the time, measured in seconds from the start of the video, when the player should stop playing a video. Note that the time when playback is stopped is measured from the beginning of the video and not from the value of either the start player parameter or the startSeconds parameter, which is used in YouTube Player API functions for loading or queueing a video.

The new Embedding a YouTube player section explains different ways to embed a YouTube player in your application. This section incorporates information from the old Example usage section, which has been removed. The new Selecting content to play section explains how to configure the player to load a video, a playlist, search results for a specified query, or uploaded videos for a specified user.

The new list and listType parameters let you specify the content that the player should load.



19 :: 20 :: 21 :: 22 :: 23 :: 24 :: 25
Comments
  • Tygodal27 days agoIt is remarkable, rather amusing messageMÚSICA RELACIONADA
Comments
  • Vudokinos17 days agoIt is the true informationMobile site
Comments
  • Sham20 days agoOn your place I so did not do.
Comments
  • Shakataur24 days agoIt will be last drop.Playlist Mad Cool Festival 2020
Comments
  • Aragal3 days agoWrite to me in PM, we will communicate.New and noteworthy. I apologise, but, in my opinion, you commit an error. Let's discuss it.
Comments
  • Totaxe29 days agoI recommend to look for the answer to your question in google.comEasy transfer and transition
Comments
  • Tanos23 days agoVery much the helpful informationYouTube app